Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Case: Specifications
SERVICE SPECIFICATIONS
Transmission Case Oil Seal:
Drive In Depth ................................................................................................................................................... 2.4 +/- 0.3 mm (0.094 +/- 0.012 inch)
Transaxle Case Oil Seal:
Drive In Depth ................................................................................................................................................... 2.4 +/- 0.3 mm (0.094 +/- 0.012 inch)
TORQUE SPECIFICATIONS
Transmission Case To:
Transaxle Case ................................................................................................................................................................................ 29 Nm (22 ft. lbs.)
Transmission Case Cover ............................................................................................................................................................... 18 Nm (13 ft. lbs.)
Shift and Select Lever Shaft Assembly ........................................................................................................................................... 20 Nm (14 ft. lbs.)
Rear Bearing Retainer .................................................................................................................................................................... 27 Nm (20 ft. lbs.)
Selecting Bellcrank Assembly ........................................................................................................................................................ 25 Nm (18 ft. lbs.)
Transaxle Case Receiver To:
Transaxle Case ............................................................................................................................................................................ 11 Nm (96 inch lbs.)
Transaxle Case To:
Clutch Release Bearing Retainer ................................................................................................................................................. 11 Nm (96 inch lbs.)
Control Lever Housing Support Bracket ..................................................................................................................................... 11 Nm (96 inch lbs.)
No.1 and No.2 Oil Receiver Pipe Set Bolt ........................................................................................................................................... 17 Nm (13 ft. lbs.)
