Corolla Sport Coupe L4-1587cc 1.6L DOHC (4A-F) (1988)
/Page-176002.png)
(b) Gradually heat piston pin to 70 - 80°C (158 - 176°F)
(c) Coat the piston pin with engine oil.
(d) Align the front marks of the piston and connecting rod.
(e) Push in the piston pin with your thumb.
(f) Install a new snap ring on the other side of the piston pin hole.
(g) Check that the piston moves smoothly back and forth on the piston pin.
2. INSTALL PISTON RINGS
(a) Install the oil ring expander and two side rails by hand.
