Corolla Sport Coupe L4-1587cc 1.6L DOHC (4A-F) (1988)
/Page-176003.png)
(b) Using a piston ring expander, install the two compression rings with the code mark facing upward.
(c) Position the piston rings so that the ring ends are as shown.
CAUTION: Do not align the end gaps.
3. INSTALL BEARINGS
(a) Install the bearing in the connecting rod and rod cap.
(b) Lubricate the face of the bearings with clean engine oil.
NOTE: If replacing the bearings, replace with one having the same number as marked on the bearing cap.
CAUTION: Install the bearing with the oil hole in the connecting rod.
