Corolla Sport Coupe L4-1587cc 1.6L DOHC (4A-F) (1988)
/Page-218003.png)
(a) Loosen the timing belt idler pulley mount bolt.
(b) Temporarily install the crank pulley bolt and turn the crankshaft two revolutions from TDC to TDC
NOTE: Always turn the crankshaft clockwise.
(c) Check the valve timing.
Insure that each pulley aligns with the marks as shown in the figure.
(d) Tighten the timing belt idler pulley mount bolt.
Torque: 375 kg-cm (27 ft-lb., 37 N.m)
(e) Remove the temporarily installed crank pulley bolt.
