Corolla Sport Coupe L4-1587cc 1.6L DOHC (4A-F) (1988)
/Page-218004.png)
(f) (Reference) Measure the timing belt deflection as shown in the figure.
If the measured value is not within standard, readjust with the idler pulley.
Timing belt deflection: 5 - 6 mm ( 0.20 - 0.24 in.) at 2 kg (4.4 lb, 20 N)
6. Install timing belt guide.
Install the guide, facing the cup side outward.
7. Install timing belt covers.
8. Install crankshaft pulley.
(a) Apply a light coating of engine oil on the threads and heads under of the pulley set bolt.
(b) Align the pulley set key with the key groove of the pulley and install.
(c) Using SST 09213-14010 and 09330-00021, install and torque the mount bolt.
Torque: 1,200 kg-cm (87 ft-lb, 118 N.m)
9. Temporarily install water pump pulley.
10. Install RH engine mounting insulator.
