toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

First and Reverse Brake|Page 1533 > < A/T - Oil Strainer & Accumulator Tubes Design Change|Page 1528
Page 1
background image

Band: Testing and Inspection
First and Reverse Brake

COMPONENTS

INSPECTION OF SECOND BRAKE COMPONENT

INSPECT DISCS. PLATE AND FLANGE

Check that the sliding surface of disc, plate and flange worn or burnt. If necessary, replace them.

NOTE:  

-

If the lining of the disc is exfoliated or discolored, or even a part of the printed numbers are defaced, replace all discs.

-

Before assembling new discs, soak them in ATF for at least two hours.

First and Reverse Brake|Page 1533 > < A/T - Oil Strainer & Accumulator Tubes Design Change|Page 1528