toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fluid Pump, A/T|Testing and Inspection|Page 1590 > < Fluid Pump, A/T|Testing and Inspection|Page 1588
Page 3
background image

Maximum inside diameter: 38.18 mm (1.5031 in.) If the inside diameter is greater than the maximum, replace the oil pump body subassembly.

5. CHECK STATOR SHAFT BUSHINGS

Using a dial indicator, measure the inside diameter of the stator shaft bushings.

Maximum inside diameter:
Front side 21.57 mm (0.8492 in.)
Rear side 27.07 mm (1.0657 in.)

If the inside diameter is greater than the maximum, replace the stator shaft.

Fluid Pump, A/T|Testing and Inspection|Page 1590 > < Fluid Pump, A/T|Testing and Inspection|Page 1588