toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Speedometer Gear, A/T > < Seals and Gaskets, A/T|Service and Repair|Page 1622
Page 1
background image

Shift Cable: Adjustments

1. ADJUST CONTROL CABLE

a. Loosen the nut on manual shift lever.
b. Push the manual lever fully toward the right side of the vehicle.
c. Return the lever two notches to NEUTRAL position.
d. Set the shift lever to N.
e. While holding the lever lightly toward the R range side, tighten the nut.

Speedometer Gear, A/T > < Seals and Gaskets, A/T|Service and Repair|Page 1622