Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-254005.png)
(a) 4A-FE: Remove the 2 bolts, 2 nuts, oil strainer and gasket.
(b) 7A-FE: Remove the 3 nuts, oil strainer and gasket.
13. 7A-FE: REMOVE NO.1 OIL PAN
(a) Remove the 3 transaxle mounting bolts from the engine rear end plate side.
(b) Remove the 6 bolts.
(c) Using 5 mm hexagon wrench, remove the 14 bolts and No.1 oil pan.
(d) Remove the No.1 oil pan by prying the portions between the cylinder block and No.1 oil pan with a screwdriver.