Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-160007.png)
(b) Connect the high-tension cords to spark plugs.
14. Connect engine wire.
(a) Connect the engine wire to the cylinder head cover, and install the two bolts with the engine wire cover.
(b) Connect the following connectors and wire:
-
Alternator connector
-
Alternator wire
-
Oil pressure switch connector
15. On vehicles with PS, install and adjust PS drive belt.
Install the drive belt with the pivot and adjusting bolts.
Drive belt tension:
New belt 125 ± 25 lbf
Used belt 80 ± 20 lbf
16. On vehicles with A/C, install A/C compressor mounting bracket with the four bolts.
Torque: 47 N.m (480 kgf.cm. 35 ft.lbf)
17. On vehicles with A/C, install A/C compressor.
(a) Install the A/C compressor with the four bolts.
