Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-160008.png)
Torque: 25 N.m (250 kgf.cm. 18 ft.lbf)
(b) Connect the A/C compressor connector.
18. On vehicles with A/C, install and adjust A/C drive belt.
Install the drive belt with the idler pulley nut and adjusting bolt B.
Drive belt tension:
New belt 130 ± 10 lbf
Used belt 75 ± 15 lbf
19. Install and adjust alternator drive belt.
(a) Install the drive belt with the pivot adjusting bolt and lock bolt.
Drive belt tension:
New belt 175 ± 5 lbf
Used belt 115 ± 20 lbf
(b) Tighten the four water pump pulley bolts.
Torque: 9.3 N.m (95 kgf.cm, 7 in.lbf)
20. Install RH engine under cover.
21. Install RH front wheel.
