Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-156003.png)
(a) Disconnect the following wires and clamps:
(1) Alternator connector
(2) Alternator wire
(3) Oil pressure switch connector
(4) Two wire clamps
(b) Remove the two bolts and wire harness protector.
(c) Disconnect the wire harness from the cylinder head cover.
(d) Disconnect the high - tension cords at the rubber boot. Do not pull on the high-tension cords.
NOTICE: Pulling on or bending the cords may damage the conductor inside.
(e) Disconnect the PCV hoses from the cylinder head cover.
