Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
Blower Motor Switch: Testing and Inspection
BLOWER SPEED CONTROL SWITCH INSPECTION
1. REMOVE BLOWER SPEED CONTROL SWITCH
(a) Remove the illumination light from the A/C control assembly.
(b) Using a screwdriver, pry loose the clip and push out the blower speed control switch to rear of the A/C control assembly.
Testing Blower Motor Switch
2. INSPECT BLOWER SPEED CONTROL SWITCH CONTINUITY
If continuity is not as specified. replace the blower speed control switch.