Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
(c) Using SST to hold the suspension upper support, remove the nut. SST 09729-22031
(d) Remove these parts:
-
Collar
-
Suspension upper support
-
Coil spring
-
Spring bumper
-
Lower insulator
REAR SHOCK ABSORBER ASSEMBLY
1. INSTALL LOWER INSULATOR ONTO SHOCK ABSORBER
2. INSTALL SPRING BUMPER TO PISTON ROD
3. INSTALL COIL SPRING
(a) Using SST. compress the coil spring. SST 09727-30020
NOTICE: Do not use an impact wrench. It will damage the SST.
(b) Install the coil spring to the shock absorber.
HINT Fit the lower end of the coil spring into the gap of the lower seat.
4. INSTALL SUSPENSION UPPER SUPPORT
(a) Align the suspension upper support with the shock absorber lower bracket, as shown.
(b) Install the collar to the piston rod.