Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
10. REMOVE BEARING OUTER RACES
Using a brass bar and hammer. tap out both bearing outer races.
COUNTER SHAFT INSPECTION
1. MEASURE PLANETARY SUN GEAR BUSHING INSIDE DIAMETER
Using a caliper gauge. measure the bushing inside diameter of the planetary sun gear as shown.
Standard inside diameter: 29.800 - 29.825 mm (1.1735 - 1.1742 in.)
Maximum inside diameter: 29.870 mm (1.1760 in.)
2. MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.2 - 0.5 mm (0.008 - 0.020 in.)
Maximum clearance: 0.5 mm (0.020 in.)
If the clearance is greater than the maximum, replace the planetary gear assembly.
COUNTER SHAFT ASSEMBLY