Corolla Wagon L4-96.8 1587cc 1.6L DOHC (4A-FE) (1996)
/Page-143005.png)
(e) Remove the 4 cap nuts, 4 seal washers, cylinder head cover and gasket.
14. Set No.1 Cylinder to TDC/Compression.
(a) Turn the crankshaft pulley and align its groove with the timing mark "0" of the No.1 timing belt cover.
(b) Check that the hole of the camshaft timing pulley is aligned with the timing mark of the bearing cap. If not, turn the crankshaft 1 revolution
(360°).
15. Remove No.3 and No.2 timing belt covers. Remove the 6 bolts and timing belt covers.
HINT (When re-using timing belt): Place matchmarks on the timing belt and camshaft timing pulley, and matchmarks on the timing belt to
match the end of the No.1 timing belt cover.
16. Remove crankshaft pulley.
