Corolla Wagon L4-96.8 1587cc 1.6L DOHC (4A-FE) (1996)
/Page-692001.png)
Clutch Slave Cylinder: Service and Repair
Replacement
REMOVAL
1. Disconnect clutch line.
Using Special Service Tool (SST) 09023-00100 or equivalent, disconnect the clutch line.
Use a container to catch the fluid.
Torque: 15 Nm (11 ft. lbs.)
2. Remove two bolts and pull out release cylinder.
Torque: 12 Nm (108 inch lbs.).
INSTALLATION
Installation is in the reverse order of removal.
INSTALLATION NOTE: After installation, bleed the clutch system.
