Corolla Wagon 2WD L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
3. SEPARATE ONE-WAY CLUTCH AND PLANETARY GEAR
4. REMOVE ONE-WAY CLUTCH FROM OUTER RACE
a. Remove the two snap rings and retainers from the both sides.
b. Remove the one-way clutch from the outer race.
ASSEMBLY OF ONE-WAY CLUTCH
1. IN STALL ONE-WAY CLUTCH
a. Install the one-way clutch into the outer race, facing the flanged side of the one-way clutch toward the shiny side of the outer race.
b. Install the two retainers and snap rings to the both sides.