Cressida L6-2759cc 2.8L DOHC (5M-GE) (1988)
Free length: 69 mm (2.72 in)
(c) If not as specified, use a new one.
INSTALLATION OF TIMING BELT
1. Install oil pump drive pulley
Using SST to hold the pulley, install and torque the pulley bolt.
SST - 09278-54012
Torque: 220 kg-cm (16 ft-lb. 22 N-m)
2. Install crankshaft timing pulley
Using SST and hammer, drive in the pulley.
SST - 09214-60010
3. Temporarily install idler pulley and tension spring
Push the idler pulley toward the alternator side as far as it will go and temporarily tighten it.
4. Temporarily install timing belt on crankshaft timing pulley
(a) Check the rotation direction mark placed on the timing belt during disassembly.
(b) Install the timing belt on the crankshaft timing pulley.
5. Install no.1 timing belt cover
6. Install bracket of cooler compressor