Cressida L6-3.0L DOHC (7M-GE) (1989)
10. REMOVE CLUSTER FINISH PANEL
(a) Remove the remote control mirror switch and disconnect the connector.
(b) Remove five screws and the cluster finish panel.
(c) Disconnect the connectors.
11. REMOVE COMBINATION METER
(a) Remove four screws and the combination meter.
(b) Disconnect the connectors.
12. REMOVE NO.2 UNDER COVER
Using a screwdriver, pry loose three clips and remove the No.2 under cover.
HINT: Tape the screwdriver tip before use.
13. REMOVE GLOVE COMPARTMENT
(a) Remove the screw and check arm.
(b) Remove four screws and pull Out the glove compartment.
(c) Disconnect the connector.