Cressida L6-3.0L DOHC (7M-GE) (1989)
/Page-1060005.png)
g)
Pass the lead wire of Solar Sensor through the original access hole, and reinstall the defroster grille.
h)
Route and connect the 2-pin connector of Solar Sensor to the original harness.
i)
Fasten the lead wire of Solar Sensor to the underside of the defroster duct with the clamp provided on the harness.
Ambient Sensor Installation (P/N 88625-22200)
a)
Disconnect the 2-pin connector and remove the original ambient sensor from the center brace.
