Cressida L6-3.0L DOHC (7M-GE) (1989)
Stabilizer Bar: Service and Repair
Front
1.
Raise and support vehicle.
2.
Remove engine undercover.
3.
Using socket tool No. 09313-30021, remove RH and LH stabilizer bar links.
4.
Remove stabilizer bushings, then disconnect strut bars from lower suspension arms.
5.
Remove stabilizer bar with strut bar brackets.
6.
Reverse procedure to install noting the following:
a. Ensure that RH and LH stabilizer links are in proper places. LH link is olive-green, RH link is bronze.
b. Tighten fasteners to specifications.