Cressida L6-3.0L DOHC (7M-GE) (1989)
/Page-763005.png)
4. INSTALL CLUTCH DRUM THRUST WASHER
Coat the thrust washer with petroleum jelly and install it onto the O/D support.
HINT: Make sure that the lug shape matches the hole on the O/D support.
5. CHECK OVERDRIVE BRAKE PISTON MOVING
a. Place the O/D support assembly onto the direct clutch assembly.
b. Apply compressed air into the oil passage as shown, and be sure that the O/D brake piston moves smoothly.
