Cressida L6-3.0L DOHC (7M-GE) (1989)
/Page-765004.png)
c. Place SST on the spring retainer, and compress the return spring with a shop press.
SST 09350-30020 (09350-07040)
d. Install the snap ring with snap ring pliers.
3. CHECK SECOND BRAKE PISTON MOVING
Make sure the second brake piston moves smoothly when applying and releasing low-pressure compressed air to the second brake drum.
4. INSTALL THRUST WASHER
Coat the thrust washer with petroleum jelly and install it.
HINT: Make sure that the cutout portions of thrust washer match teeth of the spring retainer.
