toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Collision / Non-Collision Inspections|Page 3917 > < Seat Belt Tensioner|Description and Operation
Page 1
background image

Seat Belt Tensioner: Testing and Inspection
Collision / Non-Collision Inspections

INSPECTION 

1. PRETENSIONER IS NOT ACTIVATED

a. Perform a diagnostic system check.

b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.

-

Check for cuts and cracks in, or marked discoloration on the quarter trim or center pillar lower garnish.

-

Check for cuts and cracks in wire harness, and for chipping in connectors.

-

Check for deformation of the quarter panel or center pillar.

Collision / Non-Collision Inspections|Page 3917 > < Seat Belt Tensioner|Description and Operation