FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-1815001.png)
Power Door Lock Switch: Testing and Inspection
Door Control Switch (for Driver Side)
DOOR LOCK: DOOR CONTROL SWITCH (for Driver Side):
INSPECTION
1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Check the resistance of the door control switch.
(1) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the power window regulator master switch.
