FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-986001.png)
Ignition Switch: Service and Repair
Installation
1GR-FE STARTING: IGNITION SWITCH: INSTALLATION
INSTALLATION
1. INSTALL IGNITION SWITCH ASSEMBLY
(a) Connect the connector.
(b) Install the ignition switch with the 2 screws.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
