FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Speaker: Testing and Inspection
Roof Speaker
ON-VEHICLE INSPECTION
1. INSPECT ROOF SPEAKER ASSEMBLY
HINT: Remove interior parts so that the roof speaker can be seen.
a. Check the speaker installation.
OK: The speaker is securely installed.
If the result is not as specified, reinstall the roof speaker.
b. Visually check the speaker.
OK: The metal arm of speaker is not bent.
The screw of speaker is not loosened.
If the result is not as specified, replace the roof speaker.
c. Check the resistance.
1. Disconnect the speaker connector.
2. Using an ohmmeter, measure the resistance between the terminals.
If the result is not as specified, replace the roof speaker.