toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Gap Between Front Bumper Fascia and Skid Plate|Page 6379 > < Body - Replacement Bumper Cover Refinishing|Page 6373
Page 1
background image

Front Bumper Cover / Fascia: By Symptom
Body - Gap Between Front Bumper Fascia and Skid Plate

ACCESSORIES
AX002-07

Title:
SKID PLATE SHIM KIT

Models:
'07 FJ Cruiser

May 29, 2007

Introduction

Some customers may complain of an uneven gap between the front skid plate and front bumper fascia. An adjustment kit is now available to establish an
even gap between the skid plate and front bumper fascia. If the gap between the right and left side of the skid plate and front bumper fascia is less than 3
mm (0.12 in.), then no adjustment is required. The following procedure should be used ONLY if you are unable to obtain a gap of less than 3 mm from
the skid plate adjustment during installation.

Applicable Vehicles

^

2007 model year FJ Cruiser vehicles.

Parts Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Repair Procedure

1.

Measure and record the gap of the skid plate to the bumper fascia.

Body - Gap Between Front Bumper Fascia and Skid Plate|Page 6379 > < Body - Replacement Bumper Cover Refinishing|Page 6373