FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1410004.png)
b. Using a moulding remover, disengage the 8 claws and remove the front door glass outer weatherstrip.
INSTALLATION
HINT: The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
a. Engage the 8 claws and install a new front door glass outer weatherstrip.
b. Remove the protective tape.
2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
