FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Trunk / Liftgate Shock / Support: Procedures
DISPOSAL
1. DISPOSE OF BACK DOOR SUPPORT
a. Horizontally fix the back door support in a vise with the piston-rod pulled out.
b. Wearing protective glasses, using a metal saw gradually cut the shaded part between A and B, shown in the illustration, to gradually release the
gas.
CAUTION:
-
Cover the area that is being cut with a shop rag or a piece of cloth because there is a possibility that metal shards may be dispersed
by the gas.
-
The gas is colorless, odorless and harmless.