FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
6.
Apply the pad, dash panel insulator, No. 2 as shown, depending on transmission type.
A.
Automatic Transmission Figure 4.
B.
Manual Transmission Figure 5.
7.
Reinstall the black matting over the installed Pad, Dash Panel Insulator, No. 2.
NOTE
Confirm that the matting is attached to the Velcro tab on the floor board and that there is NO interference with the accelerator pedal.
8.
Reinstall the footrest and confirm that it is securely attached.
9.
Reinstall cowl side trim board and front door scuff plate.