FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
a. Remove the visor support shaft from the visor holder.
b. Remove the 2 screws and the visor.
46. REMOVE VISOR ASSEMBLY LH
HINT: Use the same procedure as for the RH side.
47. REMOVE VISOR HOLDER
HINT: Use the same procedure for both sides.
a. Disengage the 2 claws by turning the visor counterclockwise between 60 to 120° and remove the visor holder.
HINT: The claw may be damaged during removal. However, it is reusable because this does not effect its function.
48. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER
49. REMOVE INNER REAR VIEW MIRROR ASSEMBLY
50. REMOVE ROOM LIGHT ASSEMBLY