FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
a. Apply protective tape to the rear door panel in the area around the access door glass outer weatherstrip.
b. Using a moulding remover, disengage the 3 clips and remove the access door glass outer weatherstrip.
INSTALLATION
HINT: The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. INSTALL ACCESS DOOR GLASS OUTER WEATHERSTRIP
a. Engage the 3 clips and install a new access door glass outer weatherstrip.