toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brakes - Front Brake Noise Upon Application in Reverse|Page 4135 > < Brake Pedal Assy|Testing and Inspection|Page 4125
Page 1
background image

Brake Pad: Customer Interest
Brakes - Front Brake Noise Upon Application in Reverse

T-SB-0047-08

April 23, 2008

Front Brake Noise in Reverse

Service Category

Brake

Section
Brake (front)

Market 
USA

Applicability

Introduction

Some customers may experience front brake noise when driving the vehicle in reverse and applying the brake pedal. The noise will typically occur when
backing out of a parking space after the vehicle has been stopped for an extended period of time. Updated front brake rotors and brake pad shim grease
are now available to improve this condition. Use the following repair procedures to address customer concerns.

Production Change Information

This TSB applies to vehicles produced BEFORE the Production Change Effective VINs shown.

Warranty Information

APPLICABLE WARRANTY

^

This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first,
from the vehicle's in-service date.

^

Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Brakes - Front Brake Noise Upon Application in Reverse|Page 4135 > < Brake Pedal Assy|Testing and Inspection|Page 4125