FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1001005.png)
(f)
Install the set spring, bush and parking brake pull rod with the adjusting nut.
(g) Connect the parking brake switch connector.
3. INSPECT PARKING BRAKE LEVER TRAVEL
4. ADJUST PARKING BRAKE LEVER TRAVEL
5. INSTALL FRONT CONSOLE BOX
6. INSTALL BOX BOTTOM MAT
7. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)
9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
10. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.* lbf.)
