FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1007005.png)
(1) Select "SFLH" on the intelligent tester.
(2) Turn the "SFLH" on by the intelligent tester, then depress the brake pedal with stable force.
(3) When the solenoid is on, check the left front wheel by rotating it by hand.
If the left front wheel stops, replace the hydraulic brake booster.
HINT:
^
To protect the solenoid, intelligent tester turns off automatically 2 seconds after every solenoid has been turned on.
^
When rotating the wheel fast, the fail-safe function is activated and judgement cannot be made properly. So rotate the wheel as
slowly as possible.
NOTICE: When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoid is off, depress the brake pedal again and check that the left front wheel does not rotate by hand.
If the left front wheel rotates, replace the hydraulic brake booster.
(k) Inspect front ABS solenoid (SFRR) operation (step G).
HINT:
^
ON: Depress the brake pedal, activate SFRR, and then check that the right front wheel rotates.
^
OFF: Deactivate SFRR, depress the brake pedal, and then check that the right front wheel does not rotate.
(1) Select "SFRR" on the intelligent tester.
(2) Depress the brake pedal with stable force, then turn the "SFRR" on by the intelligent tester.
(3) When the solenoid is on, check the right front wheel by rotating it by hand.
If the right front wheel stops, replace the hydraulic brake booster.
HINT:
^
To protect the solenoids, intelligent tester turns off automatically 2 seconds after every solenoid has been turned on.
^
When rotating the wheel fast, the fail-safe function is activated and judgement cannot be made properly. So rotate the wheel as
slowly as possible.
NOTICE: When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoid is off, depress the brake pedal again and check that the right front wheel does not rotate by hand.
If the right front wheel rotates, replace the hydraulic brake booster.
(l)
Inspect front ABS solenoid (SFLR) operation (step H).
HINT:
^
ON: Depress the brake pedal, activate SFLR, and then check that the left front wheel rotates.
^
OFF: Deactivate SFLR, depress the brake pedal, and then check that the left front wheel does not rotate.
(1) Select "SFLR" on the intelligent tester.
(2) Depress the brake pedal with stable force, then turn the "SFLR" on by the intelligent tester.
(3) When the solenoid is on, check the left front wheel by rotating it by hand.
If the left front wheel stops, replace the hydraulic brake booster.
HINT:
^
To protect the solenoids, intelligent tester turns off automatically 2 seconds after every solenoid has been turned on.
^
When rotating the wheel fast, the fail-safe function is activated and judgement cannot be made properly. So rotate the wheel as
slowly as possible.
NOTICE: When operating it continuously, set the interval of more than 20 seconds.
(4) When the solenoid is off, depress the brake pedal again and check that the left front wheel does not rotate by hand.
If the left front wheel rotates, replace the hydraulic brake booster.
(m) Inspect rear VSC solenoid (SREC) operation (step I).
HINT:
^
ON: Depress the brake pedal, activate SREC. Release the brake pedal and check that the rear wheels do not rotate.
^
OFF: Deactivate SREC and check that the rear wheels rotate.
