FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-417014.png)
(b) Install a new O-ring onto the bank 2 cylinder head as shown in the illustration.
(c)
Apply continuous beads of seal packing (diameter 3 to 4 mm (0.12 to 0.16 in.)) to the 4 locations shown in the illustration.
Seal packing: Toyota Genuine Seal Packing Black, Three Bond 1207B or the equivalent
(d) Keep the seal surface between the cylinder block and the cylinder head shown in the illustration free of oil before installing the chain cover.
(e)
Apply continuous beads of seal packing (diameter 3 to 4 mm (0.12 to 0.16 in.)) to the timing chain cover as shown in the illustration.
Seal packing:
Water pump part: Toyota Genuine Seal Packing 1282B, Three Bond 1282B or the equivalent
Other parts: Toyota Genuine Seal Packing Black, Three Bond 1207B or the equivalent
NOTICE:
^
Install the timing chain cover within 3 minutes of applying the seal packing. The timing chain cover bolts and nuts must be tightened
within 15 minutes of the installation. Otherwise the seal packing must be removed and reapplied.
^
Do not apply seal packing to portion A shown in the illustration.
