FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(b) Install the exhaust front pipe with the new 2 nuts.
Torque: 54 N*m (554 kgf*cm, 40 ft.*lbf.)
(c)
Install a new gasket onto the front exhaust pipe.
(1) Using a wooden block and plastic-faced hammer, tap in a new gasket until it is flush with the front exhaust pipe end.
NOTICE:
^
Make sure that the gasket is in the correct direction when installing.
^
Do not reuse the removed gasket.
2. INSTALL NO. 2 FRONT EXHAUST PIPE ASSEMBLY
(a)
Install a new gasket onto the exhaust manifold LH.
(b) Install a new gasket onto the No. 2 front exhaust pipe.