FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(c)
Install the No. 2 front exhaust pipe with the 2 new nuts and 2 bolts and exhaust pipe support.
Torque: Nut 54 N*m (550 kgf*cm, 40 ft.*lbf.)
Bolt 48 N*m (489 kgf*cm, 35 ft.*lbf.)
(d) Install the exhaust pipe stopper bracket with the 2 bolts (for 4WD).
Torque: 19 N*m (193 kgf*cm, 14 ft.*lbf.)
3. INSTALL CENTER EXHAUST PIPE ASSEMBLY
(a)
Check the free length.
(1) Using vernier calipers, measure the free length of the compression spring.
Minimum: 40.5 mm (1.594 in.)
If the free length is less that the minimum, replace the compression spring.