FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1234004.png)
e. Inspect the temperature control switch operation.
1. Connect the positive (+) lead from the battery to terminal 1 (IG+) and the negative (-) lead to terminals 8 (BLW) and 20 (GND).
NOTE: Inspect the MODE switch in any position other than DEF and FOOT/DEF.
2. Check the A/C indicator and REC indicator operations when the temperature switch is operated.
If the result is not as specified, replace the integration control and panel assembly.
