FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1246025.png)
9. INSTALL STEERING INTERMEDIATE SHAFT ASSEMBLY
a. Align the matchmarks on the steering column assembly and the steering intermediate shaft assembly.
b. Install the steering intermediate shaft assembly and thrust stopper onto the steering column assembly with the bolt.
Torque: 36 N.m (367 kgf.cm, 27 ft.lbf)
10. INSTALL STEERING COLUMN HOLE COVER
11. INSTALL ECM
12. INSTALL NO. 1 INSTRUMENT PANEL BRACE BRACKET
a. for LH side:
1. Install the instrument panel brace mounting bracket with the bolt and nut.
b. for RH side:
1. Install the instrument panel brace mounting bracket with the bolt and nut.
