FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1513002.png)
6. REMOVE CLOCK ASSEMBLY
a. Disengage the 2 claws and remove the clock assembly.
HINT: Pull the clock assembly out in the direction shown in the illustration to remove it.
INSTALLATION
1. INSTALL CLOCK ASSEMBLY
a. Engage the 2 claws and install the clock assembly.
HINT: Push the clock assembly in the direction shown in the illustration, to install it.
2. INSTALL RADIO RECEIVER ASSEMBLY
3. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY
4. INSTALL INSTRUMENT PANEL GARNISH RH
5. INSTALL INSTRUMENT PANEL GARNISH LH
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
