FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1546002.png)
3. REMOVE LIGHT CONTROL RHEOSTAT
a. Disconnect the connector.
b. Disengage the 2 claws and remove the light control rheostat.
INSTALLATION
1. INSTALL LIGHT CONTROL RHEOSTAT
a. Engage the 2 claws and install the light control rheostat.
b. Connect the connector.
2. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
