FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
14. INSPECT VALVE CLEARANCE
(a)
Check the valves indicated in the illustration.
(1) Using a feeler gauge, measure the clearance between the valve lifter and camshaft.
Valve clearance (Cold):
Intake 0.15 to 0.25 mm (0.006 to 0.010 in.)
Exhaust 0.29 to 0.39 mm (0.011 to 0.015 in.)
(2) Record any out-of-specification valve clearance measurements. They will be used later to determine the required replacement valve
lifter.
(b) Turn the crankshaft 240° clockwise, and check the valves indicated in the illustration.
(1) Using a feeler gauge, measure the clearance between the valve lifter and camshaft.
Valve clearance (Cold):
Intake 0.15 to 0.25 mm (0.006 to 0.010 in.)
Exhaust 0.29 to 0.39 mm (0.011 to 0.015 in.)
(2) Record any out-of-specification valve clearance measurements. They will be used later to determine the required replacement valve
lifter.