FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-633002.png)
a. Remove the 2 screws, then remove the No. 2 ECM bracket.
INSTALLATION
1. INSTALL NO. 2 ECM BRACKET
a. Install the No. 2 ECM bracket with the 2 screws.
Torque: 3.0 N.m (32 kgf.cm, 28 in.lbf)
2. INSTALL ECM BRACKET
a. Install the ECM bracket with the 2 screws.
Torque: 3.0 N.m (32 kgf.cm, 28 in.lbf)
3. INSTALL ECM
