FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-645001.png)
Coolant Temperature Sensor/Switch (For Computer): Testing and Inspection
INSPECTION
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
a. Check the resistance.
1. Using an ohmmeter, measure the resistance between the terminals.
NOTE: If checking the engine coolant temperature sensor in water, be careful not to allow water to enter the terminals. After checking,
wipe the water off the engine coolant temperature sensor.
If the result is not as specified, replace the engine coolant temperature sensor.
