FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-655002.png)
a. Disconnect the 2 knock sensor connectors.
b. Remove the 2 bolts and 2 knock sensors.
INSTALLATION
1. INSTALL KNOCK SENSOR
a. Install the 2 knock sensors with the 2 bolts as shown in the illustration.
Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)
b. Connect the 2 knock sensor connectors.
2. INSTALL NO. 1 WATER OUTLET PIPE
a. Install the water outlet pipe with the 3 bolts.
Torque: 10 N.m (102 kgf.cm, 7.4 ft.lbf)
