FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Using a screwdriver, pry out the lock washer.
(b) Remove the lock nut and lock washer.
(c)
Remove the bolt and park/neutral position switch.
INSPECTION
1. INSPECT PARK/NEUTRAL POSITION SWITCH
(a)
Measure the resistance of the PNP switch when the shift lever is moved to each position.
Standard resistance
ADJUSTMENT