FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
-
Do not allow any scratches or foreign objects on the parts when disconnecting, as the fuel tank vent hose connector has the O-ring that
seals the pipe.
-
Perform the work by hand. Do not use any tools.
-
Do not forcibly bend, twist or turn the nylon tube.
-
Protect the disconnected part by covering it with a vinyl bag after disconnecting the fuel tank vent hose.
-
If the fuel vent connector and pipe are stuck, push and pull them to release.
c. Disconnect the connector.
d. Disconnect the EVAP hose.
e. Remove 3 bolts, then remove charcoal the canister assembly.
INSTALLATION
1. INSTALL CHARCOAL CANISTER ASSEMBLY
a. Install the canister with the 3 bolts.